Fact-checked against 4 official sources on November 21, 2026How we check
Short answer

Only a cold climate air source heat pump listed by Natural Resources Canada, or a ground source heat pump, qualifies for the Home Renovation Savings rebate. A standard air source heat pump does not.1 The program requires a heating efficiency of at least 1.8 at -15°C and at least 70% of its rated output kept at that temperature.2

See what your home gets, in about a minute.

Check my rebate

What qualifies, and what does not

The rebate list has two types of equipment: cold climate air source heat pumps (ccASHP) and ground source heat pumps. Standard air source models are not listed, even if the installer calls them efficient.1 Air-to-water systems are excluded too.2

A ccASHP must be an active model on the NRCan Eligible Product Lists. Ductless and ducted systems both count.2 The rebate is $1,250 per ton up to $7,500 for homes heated by electricity, oil, propane or wood, and $500 per ton up to $2,000 for Enbridge gas homes and rentals.1 Ground source pays up to $12,000 in the first group.

The minimum specs in plain words

The program's requirements document sets these floors for a cold climate air source heat pump.2

RequirementMinimumWhat it means
Heating efficiency over a season (HSPF2, Region V)6.6A standard lab rating for how much heat the unit delivers for the electricity it uses across a heating season
Cooling efficiency (SEER2)15.2The same idea for the summer
Heating capacity at 8.3°C12,000 BTU/hOne ton, the smallest size allowed
Efficiency at -15°C, running flat out (COP)1.8At least 1.8 units of heat for each unit of electricity in a deep cold
Capacity kept at -15°C70% of ratedOutput at -15°C must be at least 70% of the output at 8.3°C
SpeedsVariable capacityThree or more operating speeds, or continuously variable

The unit must also show as live and active on the NRCan list and be sold in Canada.2 The rebate tons come from the capacity rated at 8.3°C.1

The AHRI number is what proves it

AHRI numbers identify a specific combination of outdoor unit and indoor coil or air handler. The program wants the whole system under one AHRI number, and with a multi-split all components share it.2 A mismatched pairing might not be on the list, even if each box is.

Ask for the AHRI number on the quote, before you sign. Then search it on the NRCan list yourself. You can also ask for the sizing form: the contractor must submit an NRCan sizing and selection tool form for each outdoor unit.2 How to read a quote has the rest of the checks.

Local cold and the -15°C test point

Ontario's Building Code sets a January design temperature for each place, and only the coldest 2.5% of January hours are colder.3 Woodstock is at -19°C and Ingersoll at -18°C. Tillsonburg and Simcoe are both at -17°C, and Port Dover is at -15°C.3

The program's -15°C test point is milder than a Woodstock design day. The rebate checks the unit at -15°C, so what the unit delivers at -19°C is something to ask the installer about. That is where backup heat and sizing options C and D enter. See heat pump sizing and heat pumps in winter.

What an NRCan field test found

In NRCan's 2013 test of one cold climate air source heat pump at the Canadian Centre for Housing Technology in Ottawa, the heating COP ranged from 1.5 at -21.1°C to 3.0 at +4.9°C.4 That result comes from one unit in one house, so treat it as an illustration. It shows that efficiency falls as the weather cools. The program sets its own floor at -15°C.

The program floor of 1.8 at -15°C is a minimum for eligibility. It is a pass mark on paper, so ask the installer for the listed capacity and efficiency of the exact model quoted.

Questions to ask before you pay a deposit

  • What is the AHRI number, and is the model active on the NRCan list today?
  • Is the system a cold climate model, or a standard model sold with a similar name?
  • What is its rated heating capacity at 8.3°C in tons? The rebate is calculated from it.
  • Which NRCan sizing option is the quote based on, and what backup heat is included?
  • Has pre-approval been applied for? Installations done before approval are not eligible.1

A standard model earns no rebate here, whether the home is owned or rented. Rentals get $500 per ton up to $2,000, and that also requires a cold climate model.1 The rebate checker shows which rate applies to your home. If a salesperson says a model "qualifies", ask to see the NRCan listing for its AHRI number. Written pre-approval from the program comes first, and our referral service only passes your request to a contractor on the participating list.

See what your home qualifies for

Seven questions, about a minute, with the rules for your fuel.

Check my rebate

Common questions

Does a standard heat pump qualify for the Ontario rebate?

No. Only cold climate air source heat pumps on the NRCan list and ground source heat pumps qualify.1

What is an AHRI number?

It is the identification number for a particular outdoor and indoor equipment combination. The program requires the whole system to be listed under one AHRI number.2

Does a ductless mini-split qualify?

Yes, if it is a cold climate model on the NRCan list and the system can heat the whole conditioned space, basement included. Single-head and multi-split systems both count.2

How can I check that a model is on the NRCan list?

Ask your contractor for the AHRI number and search it on the NRCan Eligible Product Lists. The model must show as active.